Amplifier d&b Audiotechnik D6

Giá Liên Hệ
  • Mã SP : D6
  • :
  • Thương hiệu: d&b Audiotechnik
  • Tình trạng : Còn hàng
  • Bảo hành : 24 Tháng
pro sound khuyến mạipro sound khuyến mại
Khuyến mãi/Ưu đãi
hotdeal
Nhập Mã HotDeal giảm ngay 50000

Số lượng: Thanh toán: 0.00

Hoặc gọi ngay để đặt mua: 0777 891 991 | 0966 398 663 (8:00-20:00)
  • Vì Sao Bạn Nên Chọn Pro Sound ?

  • Chính hãng Hàng nhập khẩu chính hãng, giá tốt nhất VN
  • đại lý cấp 1 đại lý cấp 1 được ủy quyền từ các hãng
  • hỗ trợ kỹ thuật Hỗ trợ trọn đời với kỹ thuật kinh nghiệm lâu năm
  • số 1 việt nam Bảo hành, bảo trì sản phẩm nhanh số 1 Việt Nam
  • số 1 việt nam 1 đổi 1 trong 15 ngày nếu lỗi do NSX

ĐẶC ĐIỂM NỔI BẬT SẢN PHẨM

DESCRIPTION

The d&b audiotechnik D6 is a 2 x 600W power amplifier with built-in EQ and delay, active power factor correction, and system check, optimized for d&b loudspeakers.

If you’re spec’ing out a d&b system with medium to low power (2 x 600W peak), it follows that you’re going to need amplification that’s not only reliable and energy efficient, but specifically optimized for the superior response of d&b audiotechnik passive speakers. The d&b audiotechnik D6 is just such an amplifier. The 2U two channel lightweight D6 amplifier delivers medium power into low-impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments.

D&B AUDIOTECHNIK D6-AT A GLANCE: 

  • Dual channel amplifier
  • Mobile or fixed installation
  • 2 x 600W into 4 ohm maximum output power
  • Compatible with all current d&b loudspeaker setups except A-Series, J-Series, SL-Series, V-Series, M2, B22-SUB, or 2-Way Active mode

D&B AUDIOTECHNIK D6—PARSING THE DETAILS:

The D6 incorporates highly efficient Class D amplifiers that use a switch-mode power supply with active Power Factor Correction (PFC)*, suitable for mains voltages 100V/120V/200V/230V at 50–60Hz and maintains a stable and increased output when used with weak or unstable mains supplies. It comes with two NL4 loudspeaker output connectors. RJ 45 connectors enable access to the remote network via CAN-Bus. d&b System Check verifies that the system performs within predefined parameters, while d&b Load Monitoring enables automatic and continuous impedance monitoring. Both can determine the status of an LF or HF driver in systems with multiple elements, even if they’re crossed over passively.

The D6 has configurations for d&b loudspeakers and a linear mode. Exceptions are 2-Way Active, V-Series and B2-SUB. The signal delay capability enables user-definable settings of up to 340ms (=100m/328.1ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. To configure the amplifier, the D6 features a rotary encoder and a LCD display 

*What is power factor correction (PFC)—Power factor correction is a technique of increasing the power factor of a power supply. Switching power supplies without power factor correction draw current in short, high-magnitude pulses, which can be smoothed out by using active or passive techniques. This reduces the input RMS current and apparent input power, thereby increasing the power factor. Power factor correction tries to push the power factor of the power supply towards 1. It gets to as close as 0.95 which is acceptable for most applications. 

d&b audiotechnik D6 Applications: 

  • Touring and concerts
  • Musical productions
  • Theater and opera
  • Corporate facilities and exhibitions

Reviews - Đánh giá Amplifier d&b Audiotechnik D6

0/5

0 đánh giá

1
0 đánh giá
2
0 đánh giá
3
0 đánh giá
4
0 đánh giá
5
0 đánh giá

    Hỏi, Đáp Về Amplifier d&b Audiotechnik D6

    • Hãy là người bình luận đầu tiên !

    Thông tin sản phẩm

    • Công suất: 2 kênh 600W
    • Công nghệ: Class D
    • Kích thước: 2U (10cm)
    • Frequency Response: Pink noise or Sine wave
    • Output Power: CF = 6 dB at 4 / 8 ohms: 2 x 600/350 W ; CF = 12 dB at 4 / 8 ohms: 2 x 600/350 W
    • Equalizer: 4-band PEQ/Notch
    • Delay setting: 0.3 - 340 ms with 0.1 ms detents
    • Sampling Digital AES/EBU: 48 kHz/96 kHz
    • Mains voltage: low range 100 - 127 V, 50 - 60 Hz / high range 208 - 240 V, 50 - 60 Hz
    • Net weight: 8 kg/17.6 lb
    • Sampling rate: 96 kHz/27 Bit ADC/24 Bit DAC
    • Dimensions (h/w/d): 2 RU x 19" x 353 mm/13.9"
    Xem chi tiết
    Đóng

    Thông số kỹ thuật chi tiết Amplifier d&b Audiotechnik D6